Tech dive gear is necessary to reach deeper depths in the underwater world. These equipment features are not available in recreational dive gear. BCDs for sidemounts and backplate/wing divers are examples. If you're serious about diving in technical environments, you'll likely need advanced regulators, tanks, and computers as well. You'll find out what you should look for when choosing the right gear.
Technical diving equipment
Tech diving gear can be modified to suit your specific needs. The tech BCD's basic components are the steel or aluminum backplate and harness. D-Rings allow you to adjust the harness to suit your body. There are many options for wings. They come in different sizes and configurations. You can use one tank to make your gear.
Types of gear
There are many options for technical and recreational diving equipment. The equipment is tailored to each type of diving. Technical divers require special equipment such as wings and backplates. They also require regulators, advanced tanks, and computers. This article will explain the differences and highlight what you need in technical diving gear. This information will assist you in making the best choice for your diving needs.
Configuration of gear
Tech diving gear has a different configuration than recreational diving. Technical divers work in different environments and the equipment is designed to be more effective for technical diving. Despite the differences in the configuration of tech dive gear, they all serve the same purpose: to keep the diver comfortable during the dive. Here are some tips for tech dive gear configuration. Remember that the gear configuration must be simple and effective. A regulator with a high performance rating will have an example. Because gas density increases when diving deep, equipment should be able to withstand these changes.
Computers
The most advanced tech diving computers are equipped with larger displays and HD screens. They also have advanced features for technical dives. These computers can be used for any type of diving from recreational to technical. Some models have digital compasses and hoseless air integration. It is vital to have all this information for safety. Dive computers can make mistakes if they don’t calculate decompression factors in a certain way.
Protective thermal insulation for cold-water divers
Special Operations Forces personnel are often equipped with neoprene, which allows them to conduct training and operations. These suits offer only a tiny amount of insulation at the top, and only 1/4 of the total insulation below 100 feet. We are currently developing new wetsuit constructions that have R-values within the single digits. These suit designs will reduce thermal bridging by incorporating innovative multi-layer constructions with stop-gap materials.
Rebreathers
If you've decided to upgrade from open circuit scuba gear to rebreathers, you've probably wondered what the difference is between them and traditional regulators. Rebreathers are more difficult to maintain and require more diving time than open circuit regulators. They also have more potential for harm. Before you buy a rebreather, make sure to research the benefits.
Sidemount BCDs
The STEALTH2.0 is a sidemount BCD for technical divers. It was one of the original designs. The backmount harness has an integrated TEC wing that provides additional security for deep dives and decompression stops. Another innovation is the bottom-mounted low pressure inflator. The STEALTH 2.0 can be purchased in single-tank, double-tank or dual-tank configurations.