× Diving Tours
Terms of use Privacy Policy

Tech Dive Gear: What to Look for in Tech Dive Gear



scuba certifications near me

Tech dive gear will allow you to go deeper under the water. These gears offer features not found in recreational diving gear. BCDs with sidemount or backplate/wing are two examples. Advanced regulators, tanks and computers will be required if you are serious about diving in technical areas. This article will teach you how to choose the right gear for you.

Equipment for technical diving

Tech diving gear can be modified to suit your specific needs. The basic parts of a tech BCD are a steel or aluminum backplate, harness, and air bladder. D-Rings allow you to adjust the harness to suit your body. There are many options for wings. They come in different sizes and configurations. Even a single tank can be used to customize your gear.

Types of gear

There are many options for technical and recreational diving equipment. The equipment is tailored to each type of diving. Tech divers are often required to have special backplates/wings and sidemount BCDs. These divers also require advanced tanks, regulators, computers, and computers. This article will show you the differences in these two types of gear, and tell you what to look out for when choosing technical diving equipment. You will be able to make an informed decision about the gear that is best for you.


divegear

Configuration of gear

Tech divers are often required to use different gear. Despite these differences, all of the gear is optimized for the same purpose: keeping a diver comfortable during the dive. Listed below are some tips on tech dive gear configuration. Remember that the gear configuration must be simple and effective. A good regulator will have a high efficiency rating. When diving deep, the density of gas increases, so the equipment should be well-made to cope with this change.


Computers

The most advanced tech computer dive computers have bigger displays and HD screen, as well advanced features for technical diving. These dive computers are capable of performing all types of diving, including technical and recreational. Some models come with hoseless air integration, digital compasses and GPS features. It is vital to have all this information for safety. Dive computers can make mistakes if they don’t calculate decompression factors in a certain way.

For cold-water divers, thermal protection

Special Operations Forces personnel frequently use neoprene neoprene scuba suits to perform training and operations. These suits offer only a tiny amount of insulation at the top, and only 1/4 of the total insulation below 100 feet. To address this problem, new wetsuit constructions with R-values in the single digits are being developed. These suits are innovative and combine multi-layer constructions, with stop-gap substances, to reduce thermal friction.

Rebreathers

You've likely wondered what the differences are between traditional regulators and rebreathers if you have made the decision to switch from open circuit to scuba gear. Rebreathers require more maintenance and diving time than their open circuit counterparts, and they have more potential ways to cause you harm. It's worthwhile to spend time researching the advantages of rebreathers, as with all diving equipment.


diver license

Sidemount BCDs

The STEALTH 2.0 is one of the first sidemount BCDs for technical divers, and it has proven to be a revolutionary design. This backmount harness comes with an integral TEC wing, which provides extra security during deep dives or decompression stops. The manufacturer has also developed a bottom-mounted low -pressure inflator. The STEALTH2.0 is available in single, double, and dual-tank configurations.



 



Tech Dive Gear: What to Look for in Tech Dive Gear