The term wreck diver is usually associated with recreational diving, exploring shipwrecks. While wreck diving is the traditional site, many people are now using retired ships to create artificial reefs. To learn more about wreck diving, read on. Here are some tips to help you get started. First, get your equipment ready! There are many options for equipment. You can make the difference of a fun or dangerous dive by choosing the right gear.
Non-penetration wreck diving
These are the basics to help you get started with scuba diving. First, wrecks are often a place to fish, so divers should be aware of any lines or fishing nets. You should also be aware that the terrain underneath can have sharp edges. The currents can carry divers away from what they are looking for. It is not recommended to dive in such terrain. However, non-penetration wreck diving can be an option.
Although technical penetration diving sounds easier than it actually is, there are many dangers involved. Light zone diving poses dangers due to overhead hazards, proximity of the wreck structure, and possible trapping in narrow passageways. The presence of silt and/or mud in wrecks can also make orientation difficult and severely affect visibility. Non-penetration wreck diving is best. Divers should stay in the light zone and then move to an exit point.
A view of a sunken ruin
Surveying a sunken ship requires more than traditional surveys. You also need to have a good understanding of the maritime history and specific equipment. Depending upon the time and accuracy needed, the survey method can include a GPS fix, a tape baseline or offset and tie measurements. You have many options for surveying sunken wrecks, including sonar or other non-destructive tools.
A shipwreck inspection is intended to locate and identify the ship. It should identify historical events, navigational hazards, and environmental conditions. The survey report should include information about the vessel's features, the incident that brought it down, and any past archeological surveys. Finally, it should be possible to plot the site on a nautical chart in order to make accurate measurements.
Equipment necessary
It is important to know the details of a shipwreck before diving. Learn about the layout of the wreck, its key points and potential hazards. These details will assist you in preparing for your dive. Below, you'll learn about the essential equipment that you'll need to dive a shipwreck. Make sure to read through this checklist before diving and bring it with you to the dive site.
To avoid getting lost in the dark, you need to have good buoyancy control. Wreck diving requires good buoyancy control. You shouldn't dive in deep waters without a weight belt or a buoyancy controller tank. If you are looking for a great dive, a weight belt is essential. These two pieces of equipment will ensure that you and others are safe.